Artical Image

Amarillo Replacement Window and Door FAQs

Cleaning and operating double-hung windows is essential for maintaining their functionality and appearance. Here's a step-by-step guide to help you clean and operate your double-hung windows:

Cleaning Double-Hung Windows:

  1. Gather Supplies:

    • Mild detergent or window cleaner
    • Soft cloth or sponge
    • Bucket of warm water
    • Vacuum cleaner with a brush attachment
    • Old toothbrush or small brush
  2. Remove Dust and Debris:

    • Use a vacuum cleaner with a brush attachment to remove dust and debris from the window sill, tracks, and frame.
  3. Clean the Glass:

    • Mix a solution of mild detergent or window cleaner with warm water in a bucket.
    • Wet a soft cloth or sponge in the solution and wipe down the window glass.
    • Use a clean, dry cloth to polish the glass and remove any streaks.
  4. Clean the Frame and Sill:

    • Dip the cloth or sponge into the cleaning solution and wipe down the window frame and sill.
    • For stubborn dirt or grime, use an old toothbrush or small brush to scrub the corners and crevices.
  5. Clean the Tracks:

    • Open the window and vacuum the tracks to remove dirt and debris.
    • If there is still dirt in the tracks, use a cloth or brush to clean thoroughly.
  6. Lubricate Moving Parts:

    • Apply a silicone-based lubricant to the window tracks and moving parts to ensure smooth operation.

Operating Double-Hung Windows:

  1. Unlock the Window:

    • If your double-hung window has locks, unlock them before attempting to open or close the window.
  2. Open the Bottom Sash:

    • For double-hung windows, the bottom sash typically slides upward. Hold the bottom sash firmly and lift it up.
  3. Close the Bottom Sash:

    • Gently lower the bottom sash until it's fully closed. Ensure it engages with the locks if your window has them.
  4. Open the Top Sash (Optional):

    • Some double-hung windows have a top sash that can be opened. To open the top sash, release any locks and lift it upward.
  5. Close and Lock the Top Sash (Optional):

    • If you opened the top sash, lower it back down and engage any locks.
  6. Check for Smooth Operation:

    • Ensure that both the top and bottom sashes move smoothly along the tracks. If there are any difficulties, inspect for debris or issues in the tracks.
  7. Adjust Counterweights (if applicable):

    • Some double-hung windows use counterweights to assist in opening and closing. If you notice imbalances or difficulties, consult the manufacturer's guidelines for adjusting the counterweights.

By regularly cleaning and maintaining your double-hung windows, you can ensure they operate smoothly and last longer. Always follow the manufacturer's recommendations for cleaning and maintenance specific to your window type.

Energy Efficiency 

Double-paned or dual-glazed glass refers to a type of window or glass structure that consists of two glass panes separated by a space filled with air or a special gas, typically argon or krypton. This design creates a sealed unit, often known as an insulated glass unit (IGU). The primary purpose of using double-pane glass is to enhance thermal insulation and improve energy efficiency in buildings.

Here are some key features and benefits of double-paned or dual-glazed glass:

  1. Insulation: The air or gas-filled space between the two glass panes acts as an insulator, reducing heat transfer through the window. This insulation helps maintain a more consistent indoor temperature and reduces the need for heating or cooling, resulting in energy savings.

  2. Condensation Reduction: The sealed space between the panes minimizes the likelihood of condensation forming on the interior surface of the glass. This is particularly beneficial in climates where temperature differences between the inside and outside can lead to condensation.

  3. Sound Insulation: Double-paned windows also provide improved sound insulation compared to single-pane windows. The additional layer of glass and the trapped air or gas help dampen outside noise, creating a quieter indoor environment.

  4. UV Protection: The multiple layers of glass can also reduce the amount of ultraviolet (UV) radiation that enters the building. This helps protect furniture, carpets, and other items from fading or damage caused by prolonged exposure to sunlight.

  5. Enhanced Security: While the primary purpose is energy efficiency, the dual-pane design can add an extra layer of security compared to single-pane windows, making it more difficult for intruders to break through.

  6. Energy Efficiency: The improved thermal insulation provided by double-paned windows can result in lower energy bills by reducing the need for heating or cooling systems.

  7. Environmental Impact: Due to reduced energy consumption, double-paned windows contribute to lower greenhouse gas emissions, making them environmentally friendly.

When considering double-paned windows, it's essential to look at the overall window design, including frame materials and any additional coatings or features. Different manufacturers may offer variations in technology and materials to enhance the performance of double-glazed windows.

What are Egress Requirements

Egress requirements refer to regulations that dictate the size, location, and accessibility of windows and doors in residential buildings, particularly in bedrooms and below-grade spaces like basements. These requirements are crucial for ensuring safe exits in case of emergencies such as fires. Egress codes can vary between jurisdictions, so it's essential to check with local building authorities or code enforcement offices for the most accurate and up-to-date information.

Here is some general information on common egress requirements that are often found in building codes across the United States. Keep in mind that these may not be the exact requirements for Amarillo, and you should consult the local authorities for precise details:

  1. Minimum Window Size:

    • Windows used for egress purposes (especially in bedrooms) typically need to have a minimum clear opening. This opening is often specified in terms of width, height, and total area.
  2. Minimum Window Height from Floor:

    • The bottom of the egress window opening is usually required to be a certain maximum height above the finished floor. This ensures that the window is easily accessible for escape.
  3. Window Well Requirements:

    • If a window is located in a basement or below-grade space, there might be requirements for window wells to provide sufficient access and prevent soil or debris from blocking the window.
  4. Access and Well Ladder:

    • If a window well is more than a certain depth, it may need an access ladder or steps to facilitate safe exit.
  5. Window Type:

    • Some codes specify that the egress window must be of a certain type, such as casement or double-hung, to ensure it can be easily opened for escape.
  6. Fire Escape Requirements:

    • In some cases, there might be specific requirements related to fire escape routes, especially for buildings with multiple stories.

Remember, building codes can be updated, and local variations exist. To get the most accurate information for Amarillo, Texas, check with the City of Amarillo's Building Safety Department or the relevant local authority. They can provide you with the specific egress requirements applicable to your location.